Beauty Flex
Professional 10 in 1 HydraFacial Machine with Skin Analyzer | Hydra Dermabrasion Machine
Professional 10 in 1 HydraFacial Machine with Skin Analyzer | Hydra Dermabrasion Machine
Couldn't load pickup availability
Professional · 10 in 1 · New body
The Professional 10 in 1 HydraFacial Machine is the upgraded version of our 9 in 1 hydra-dermabrasion system. It has a new vertical body with a large display and a 4-bottle solution system. It keeps all 9 handpieces and adds a tenth: a Skin Analyzer handpiece, so you can check the skin and treat it on the same machine.
- Skin colour
- Water-oil balance
- Fine lines
- Inflammation
- Pigmentation
- Pores
10 handpieces, one system
A new-generation spiral tip that does three jobs in one pass. Its impurity-suction zones, central essence-release area and soft exfoliating blades work together, so the skin is exfoliated, fed with solution and vacuumed clean at the same time. Up to 96 kPa negative-pressure suction lifts debris from the pores. It helps soften keratin and clear blackheads in a way a traditional single-zone small-bubble tip can’t.
Creates an oxygen-rich environment on the skin while the solution works. Paired with fruit-acid (AHA) products, it helps carry the active solution into the skin for a fresher, more even finish.
A 4–5 kg positive-pressure jet breaks water and oxygen into very fine, fast particles that mist evenly over the face. It gives a deep-hydration feel and supports moisture retention after cleansing.
Chrome ultrasonic head vibrating at 1.1 MHz. The rapid micro-vibration helps open the pores and move serums into the skin quickly, so the products you apply work harder.
Two polished electrodes send radio-frequency energy between them. Skin molecules vibrate and create gentle warmth from friction deep below the surface. This warmth is used for firming care and smoother-looking skin.
One head, two modes. 0–6 °C cold calms and soothes the skin after extraction. 36–46 °C warmth softens and prepares it before treatment. Switching between them helps the skin settle quickly.
A stainless-steel blade that vibrates at high frequency. The waves soften the surface keratin layer and lift out dirt for a deep, gentle cleanse without harsh scrubbing.
The tip carries nanocrystals made of single-crystal silicon: tough, yet so thin and short that they only reach the skin’s outer absorption barrier, far from blood vessels and nerves. This is why it’s needle-free and non-invasive, with no bleeding. The nanocrystals open micro-channels for absorption, so serums spread evenly into the skin, and EMS microcurrent works alongside them.
Facet-cut rollers deliver EMS microcurrent that alternates between positive and negative (50–800 µA, roller 200 Hz). It gives a lifting massage while helping charged actives move into the skin.
An HD imaging pen with three light modes: red light for the epidermis, green light for the dermis, and blue/UV light for pores. Android software analyses 6 data items automatically: skin colour, water-oil balance, fine lines, inflammation, pigmentation and pores. It saves a report your client can see and share, so you can plan the treatment and show the client what you found.
Why this machine is premium
- Triple-Efficiency Operating Head. Three zones on one spiral tip exfoliate, infuse and extract in a single pass.
- Single-crystal silicon nano-chip. Needle-free infusion that stays within the outer absorption layer.
- Tri-colour spectral skin analysis. Red, green and UV imaging with saved reports, so every treatment starts with real data.
- 10 handpieces on one vertical machine. Hydro-dermabrasion, oxygen, ultrasound, RF, cold/hot, microcurrent and imaging.
- Strong hydraulics. Up to 96 kPa vacuum and a 4–5 kg water-oxygen jet, with a 4-bottle solution system.
4-bottle solution system
Who it’s for
Skin clinics, dermatology practices, beauty salons and spas that want hydra-dermabrasion, oxygen, RF, ultrasound, cold/hot and microcurrent care plus HD skin imaging in one vertical machine.
Technical specifications
| Handpieces | 10, including Skin Analyzer |
| Solution system | 4 bottles |
| Bipolar RF frequency | 0.2–0.5 MHz |
| Ultrasound | 1.1 MHz |
| Cold / Hot | 0–6 °C / 36–46 °C |
| Water-oxygen pressure | Positive 4–5 kg · negative 96 kPa |
| Water flow | ≤ 5 L |
| Microcurrent | 50–800 µA (roller 200 Hz) |
| Probe tips | 3 soft + 8 hard |
| Power | 200 W |
| Voltage | 200–240 V, 50 Hz |
Ordering from Beauty Flex
- Warranty: 6 months against manufacturing defects. The display and probes are not covered.
- Free pan-India delivery in 5–6 days depending on pincode, with live tracking.
- Technical and video-call support on setup and use.
- Paid service and support are also available after the warranty period.
- Consumables and spares can be ordered directly from the website.
For professional use by trained operators. Individual results may vary.
